BF-F9 V2+ power to 8 watts

Guides and articles on how to set up your Baofeng radio.

BF-F9 V2+ power to 8 watts

Postby DrakoWarkan » Sat Jan 03, 2015 7:19 am

I an new to this site and to the Ham world, I got a Baofeng BF-F9 V2+ radio and it only has two menu power settings High and Low this is NOT what the add showed it stated tri power (1W/4W/8W) switchable.

My question is how do you set the Baofeng BF-F9 V2+ to transmit at 8Watts?

I am very disappointed as I wanted to use this radio for my EMS rescue and tactical duties.

Thanks for any help. :(
DrakoWarkan
 
Posts: 1
Joined: Sat Jan 03, 2015 7:08 am

Re: BF-F9 V2+ power to 8 watts

Postby KD4NDF » Mon Jan 19, 2015 9:59 pm

In the power setting I had low/med/High. If resetting doesn't work I would say return it for another one.
KD4NDF
 
Posts: 2
Joined: Mon Jan 19, 2015 9:55 pm

Re: BF-F9 V2+ power to 8 watts

Postby towerspace » Thu Jun 09, 2016 2:54 am

Look for TXP in MENU.. Use the arrows to find TXP.. When found, push TXP again to select it. Look for either HIGH, MEDIUM, or LOW in the lower part of the display. If you don't see those choices, you may not have a valid BF-F9 V2 as I do! By default, the HIGH is shown unless you've programmed it with CHIRP. Hope this helps.
-. -. ..... -. -.
towerspace
 
Posts: 1
Joined: Thu Jun 09, 2016 2:42 am

Re: BF-F9 V2+ power to 8 watts

Postby vaiybora » Fri Jul 20, 2018 6:07 am

Wow !!! absolutely fantastic topic. I am very glad to have such useful information.

ดูหนังออนไลน์

:mrgreen: :mrgreen:
vaiybora
 
Posts: 65
Joined: Tue Aug 29, 2017 10:19 pm


Return to Support & Guides

Who is online

Users browsing this forum: No registered users and 3 guests

cron